Valley View, TXLocal --:--Sun now --Daylight today --
Sun on a roof in Valley View.
The PVWatts model puts a generic roof array in Valley View at 1,512 kWh a year for each kW of panels, using typical-year weather from a station 2.2 km away. A modeled estimate for a standard setup, not a measurement of any roof.
A year on one roof.
Scroll from January to December: the noon sun over Valley View climbs and falls, and the modeled output follows it.
kWh per kW DC, modeled by PVWatts. Best month 155, weakest 91: a ratio of 1.7.
How Valley View comparesderived from the figures above
Where Valley View sits.
Valley View ranks 636th of 1220 Texas places modeled here, at the 48th percentile. Its 1,512 kWh per kW is below the Texas median of 1,515. The strongest months are July, June, August and the weakest are December, February, November; output peaks in July and bottoms out in December. In all, 29.7% of the year arrives in June, July and August, more than the 29.3% of the median place.
Closest modeled neighbors
- Road Runner, 7 km east: 1,508 kWh per kW, 4 less than Valley View.
- Sanger, 11 km south: 1,522 kWh per kW, 10 more than Valley View.
- Gainesville, 18 km north: 1,500 kWh per kW, 12 less than Valley View.
- Lindsay, 19 km north: 1,513 kWh per kW, 1 more than Valley View.
- Pilot Point, 21 km southeast: 1,516 kWh per kW, 4 more than Valley View.
- Tioga, 22 km east: 1,540 kWh per kW, 28 more than Valley View.
- Krum, 24 km south: 1,537 kWh per kW, 25 more than Valley View.
- Collinsville, 25 km east: 1,529 kWh per kW, 17 more than Valley View.
- Aubrey, 25 km southeast: 1,532 kWh per kW, 20 more than Valley View.
Against Fort Worth
The nearest of the six largest modeled places is Fort Worth, 80 km to the south, at 1,535 kWh per kW. Valley View models 23 kWh per kW (1.5%) below it. Valley View lies 0.7 degrees of latitude north of Fort Worth, and the sun stands higher in the sky the further south you go, which matches its lower modeled output. The two weather stations sit a similar distance from their points (2.2 km and 1.5 km), so station distance does little to explain the gap, and the weather record does the rest.
The second-nearest large place is Dallas, 85 km southeast, where the same model gives 1,500 kWh per kW, so Valley View runs 12 above that figure. Against the Texas median place month by month, Valley View runs at least 2% higher in January, March. It runs at least 2% lower in August, October, November, December.
Electricity in Cooke CountyEIA-861
Electricity prices nearby
EIA lists Oncor Electric Delivery and Texas-New Mexico Power in this county. Where Valley View is on Oncor Electric Delivery and Texas-New Mexico Power's lines, homes buy energy from a retail electricity provider and the price depends on the plan. Parts of Valley View may instead be served by a co-op or utility listed below, which sets its own rates; check your bill. For scale only, the median 2025 average price across the 60 Texas retail providers on this site is 15.32¢ per kWh, which would put the modeled 1,512 kWh at $232 per kW a year, plain multiplication and not a savings estimate or an offer.
Also listed in the county
- Denton County Elec Coop, Inc: 13.18¢ per kWh, a bundled average, 310,805 residential customers across 6 counties.
- Grayson-Collin Elec Coop, Inc: 17.04¢ per kWh, a bundled average, 97,950 residential customers across 4 counties.
- Wise Electric Coop Inc: 15.33¢ per kWh, a bundled average, 20,682 residential customers across 7 counties.
- Oncor Electric Delivery Company LLC: 5.64¢ per kWh, delivery charges only, before the retail energy price, 3,545,814 residential customers across 99 counties.
These utilities serve other parts of the county, which can include parts of Valley View. They are the largest bundled providers, and the largest delivery-only one, whose EIA service territory lists the county. A county can list several, and which one serves a street depends on the address, so check your bill.
Modeled estimateruns in your browser
Size the array, see the kWh.
Scale the Valley View model to another array size, take off extra losses for shade or dirt, and price the energy at any rate. It is arithmetic on the PVWatts output above, nothing more: not a quote, not a savings estimate and not advice.
Starting rate: the Texas residential average of 15.4¢ per kWh. At that rate the modeled output is worth $233 per kW a year as plain multiplication.
PVWatts v8station 694332
Month by month, per kW.
| Month | kWh per kW |
|---|---|
| January | 107.9 |
| February | 99.7 |
| March | 128.0 |
| April | 138.3 |
| May | 141.8 |
| June | 147.1 |
| July | 155.2 |
| August | 146.1 |
| September | 131.0 |
| October | 122.6 |
| November | 102.6 |
| December | 91.2 |
| Year | 1,512 |
Model assumptions
- System size
- 1 kWDC, results scale per kW
- Mount
- fixed roof mount
- Tilt
- 20°
- Azimuth
- 180°due south
- Modules
- standard
- System losses
- 14%
Location 33.48, -97.16 (Valley View, population 891). Weather: typical-year data from station 694332, 2.2 km from that point.
Getting a measured number
A model cannot see your roof. Installers measure pitch, shade and the electrical panel on site. Quote marketplaces such as EnergySage, SolarReviews and WattBuy collect bids from local installers. Rate & Roof does not rank installers.
Next step
Payback, buyback.
The sliders above price the energy at one rate. The payback calculator adds the system cost and your buyback plan type, and shows every assumption. It is an estimate, not advice.
Email updatesdouble opt-in
Rates change. Get told.
One list, for Texas solar buyback plans. We write when a tracked rate changes and when new city data is published. Nothing else, and nothing until you confirm.